All Project Reports

B.Tech, MCA, MBA Projects Reports

Tag: B. TECH MECHANICAL PROJECTS-HYDRAULIC SPRING STIFFNESS TESTING MACHINE

B. Tech Mechanical Projects -Hydraulic Spring Stiffness Testing Machine

HYDRAULIC SPRING STIFFNESS TESTING MACHINE

 

INTRODUCTION:

• An engineer is always focused towards challenges of bringing ideas and concepts to life.
• Therefore, sophisticated machines and modern techniques have to be continuously developed and implemented for economical manufacturing of products.
• At the same time, we should take care that there has been no compromise made with quality and accuracy.
• Springs isolate the driver from road imperfections by allowing the tire to move over a bump without drastically disturbing the chassis. If the frame remains relatively steady, then the tires are better able to follow road contours automatically.
• Consumers also often change springs to alter their vehicle’s ride and handling characteristics. Spring problems are easy to identify.

 

WORKING PRINCIPLE

The working of hydraulic stiffness testing machine is based on Pascal’s law which states that PRESSURE APPLIED AT ANY POINT ON ANY CONFINED LIQUID IS TRANSMITTED EQUALLY TO ALL OTHER POINTS” This principle is same as that used in the hydraulic press.

HYDRAULIC SPRING STIFFNESS TESTING MACHINE

Advantages:

1. spring (spiral and helical) of different diameters can be checked. (Range 40mm – 60mm)
2. Spring can be check without damaging the spring.
3. No skill is required to verify spring.
4. The testing process is carried out in very less time, so production rate is very high.
5. One man effort is enough to check the spring.
6. Semi-skilled and unskilled labor can operate this machine efficiently.
7. The system is self-lubricating.
8. The operation is noiseless.

 

Disadvantages:

• Spring wire diameter cannot be checked below 40mm and above 60mm. (If we check the diameter of spring below 40mm there are chances for spring to buckle)
• As the system is hydraulic, leakage may occur and hence refilling of oil is necessary.
• The stiffness of springs like leaf spring cannot be checked.

 

Application

1. The machine is used for measuring spring stiffness for different spiral and helical springs in the range of 40mm to 60mm.
2. Can be used in garages where frequent inspection of the suspensions of various automobiles is carried out.
3. With the help of this machine, it is possible to analyze when to replace the suspension by comparing the stiffness of the testing suspension with that of the standard stiffness.

 

 

Hydraulic Spring Stiffness Testing Machine No ratings yet.

B. Tech Mechanical Projects -Hydraulic Spring Stiffness Testing Machine HYDRAULIC SPRING STIFFNESS TESTING MACHINE   INTRODUCTION: • An engineer is always focused towards challenges of bringing ideas and concepts to life. • Therefore, sophisticated machines and modern techniques have to be continuously developed and implemented for economical manufacturing of products. • At the same time, […]

If you need more details about above projects or could not find your related projects, kindly email us at:- admin@allprojectreports.in

All Project Reports © 2017 | XML Feeds | Sitemap | Privacy | Disclaimer | Contact Us