All Project Reports

B.Tech, MCA, MBA Projects Reports

Category: Mechanical Projects

Auto Braking System

 

Synopsis

Design the automatic braking system for avoiding the accident

 

Scope:

This project is necessary to be attached to every vehicle. Mainly it is used when to driving the cars in the night time. Mostly the accident occurred in the night time due to long travel the driver may get tired. So the driver may hit the front side vehicle or road side trees. By using this project, the car is stopped by the auto braking system. So we can avoid the accident.

 

Brief Methodology:

Its designed with the help of a microcontroller, Receiver, Signal conditioning unit, Ultrasonic Transmitter, Analog to Digital converter, Driver Circuit and Mechanical arrangement.

The oscillator circuit generates a 40KHZ frequency signal. It transmitted through the ultrasonic transmitter. The ultrasonic receiver is used to receive the reflected wave due to in front of the vehicle. Then the reflected wave is given to signal conditioning unit in which the incoming stream amplified and converted into a square pulse. Then the rectangular pulse is provided to ADC. Depends upon the distance the reflected wave strength is varied.

ADC is nothing but analogue to digital converter, which converts the input analogue signal into the corresponding and digital signal. This digital signal is provided to the microcontroller.

The microcontroller may PIC or Atmel both are flash type reprogrammable microcontroller in which we have now drafted. When it gets the signal from ADC displayed on the LCD.

This is equal to the distance between the vehicle and front side object. The next object vehicle, trees or road barriers. The nearest critical distance value already stored in the microcontroller.

When measured distance has reached this value, microcontroller automatically activates the relay driver circuit. The relay output directly linked with the mechanical arrangement. Through this automated mechanism, braking is provided, and vehicle is stopped to avoid the accident

 

Auto Braking System No ratings yet.

Auto Braking System   Synopsis Design the automatic braking system for avoiding the accident   Scope: This project is necessary to be attached to every vehicle. Mainly it is used when to driving the cars in the night time. Mostly the accident occurred in the night time due to long travel the driver may get […]

Nano Technology No ratings yet.

Nano Technology Abstract It is a technology that which exploits phenomena, and structures which could best occur at the nanometer scale, that’s the size of various atoms and small molecules. Nanotechnology is the facts and manipulates of depending on variety at dimensions of approximately 1 to one hundred nanometers, in which specific phenomena enable novel […]

Running gearing No ratings yet.

Running Gearing Synopsis Running gearing is a new type of device designed to change continuous motion into rotary motion. The term “running gearing” is only a temporary name given to the mechanism and the tool has not yet signified given its specific name. The jogging gearing developed by way of Mr V.A.Vorgushin, an engineer, an […]

Hydraulic Spring Stiffness Testing Machine No ratings yet.

B. Tech Mechanical Projects -Hydraulic Spring Stiffness Testing Machine HYDRAULIC SPRING STIFFNESS TESTING MACHINE   INTRODUCTION: • An engineer is always focused towards challenges of bringing ideas and concepts to life. • Therefore, sophisticated machines and modern techniques have to be continuously developed and implemented for economical manufacturing of products. • At the same time, […]

Six Speed Constant Mesh Gear Box No ratings yet.

B. TECH MECHANICAL PROJECTS ( Six Speed Constant Mesh Gear Box) Design And Fabrication Abstract – All the automobile vehicles available are constantly set to changing speed and torque between the engine and driving wheels. Torque is not directly mutilated, but it can be done in the form of power using a suitable device. It […]

Maglev Windmill-Project Reports No ratings yet.

B.TECH – MECHANICAL PROJECT REPORTS   MAGLEV WINDMILL-MECHANICAL PROJECT REPORTS   SYNOPSIS • Wind power turbines come in handy in the market today. Vertical-axis wind turbine happens to be one of the most popular and widely coveted wind turbines. • It is also more practical, reliable and cost-effective has the best longevity and durability features. […]

If you need more details about above projects or could not find your related projects, kindly email us at:- admin@allprojectreports.in

All Project Reports © 2017 | XML Feeds | Sitemap | Privacy | Disclaimer | Contact Us