All Project Reports

B.Tech, MCA, MBA Projects Reports

Category: Latest Mechanical Engineering (ME) Seminar Topics

Automatic Saw Cutting

SYNOPSIS

Automatic, Saw Cutting is to cut the metals and woods automatically without human resources.

 

PROJECT DESCRIPTION:

Automatic Saw Cutting project is beneficial in the industrial companies. In industrial groups, there is need to cut the metals and woods to a different shape. By using human resources it takes many times, and also accuracy may be low. By using this project, the cutting process preformatted automatically. So it saves the time as well as decreases the labourers. The efficiency also achieved in this project.

This project designed with a microcontroller, Real-time clock, Relay driver circuit along with relays, Keypad and Mechanical arrangement.

The real-time clock is the particular type to IC integrated circuit used to generate a real timing signal. Its called as RTC. The battery is in build in this IC.

When power is switched OFF, then it can maintain the timing signal. RTC sends the timing signal to the microcontroller.
Here the microcontroller may Atmel or PIC both are flash type reprogrammable microcontroller in which we have already programmed. The set of keys in the keypad is used to set the time of operation.

For example, if you want to cut the material for an hour the timing is set in the microcontroller through the critical bad. The microcontroller receives the timing signal from RTC and activates the relay driver circuit for that particular period.

The relay output is directly connected mechanical arrangement. This automatic mechanism is designed to be fit the different hacksaw such as slanting teeth, sharp teeth etc.

So the cutting operation is performed for that particular period. At the end of the setting time, microcontrollers turn OFF the relay, so the cutting process is stopped. In this way, cutting operation performed automatically

 

 

 

Automatic Saw Cutting No ratings yet.

Automatic Saw Cutting SYNOPSIS Automatic, Saw Cutting is to cut the metals and woods automatically without human resources.   PROJECT DESCRIPTION: Automatic Saw Cutting project is beneficial in the industrial companies. In industrial groups, there is need to cut the metals and woods to a different shape. By using human resources it takes many times, […]

Auto Braking System No ratings yet.

Auto Braking System   Synopsis Design the automatic braking system for avoiding the accident   Scope: This project is necessary to be attached to every vehicle. Mainly it is used when to driving the cars in the night time. Mostly the accident occurred in the night time due to long travel the driver may get […]

Rubber No ratings yet.

Rubber   Abstract Rubber is a plastic material; rubber may be spread, cemented, calendered, moulded, extruded, caulked, puttied, or wrapped into virtually any shape. Rubber can be coated with cloth, metal, plastic or forced into cracks. Rubber is a sturdy fabric; rubber requires heavy equipment for forming and fabricating. The enormous warmness generated during the […]

Biofiltration No ratings yet.

Biofiltration   Abstract Airstreams can be purified by passing them through a biologically active filter medium to destroy organic and inorganic contaminants. It is especially useful for low concentrations of VOCs and inorganic chemicals (e.g., sulfur compounds). It has proven helpful for mixed waste air streams and especially applicable for odour reduction. Heavily halogenated compounds […]

Biodiesel No ratings yet.

Biodiesel Abstract Bio-diesel is An vegetable oil transformed should look like diesel fuel. That maximum utilization of nut oil might have been constructed In 1895 Toward Dr Rudolf diesel himself (1858-1913), who predicted- “The utilization of vegetable oils motor fills might appear inconsequential today. Be that as such oils might turn in the course of […]

Disk Brake No ratings yet.

Disk Brake   Synopsis When in the modern technology of human transportation has increased, the mechanical devices used to slow down and stop vehicles has also grown more complex. The early years of automotive development were an exciting time for the designing engineers, “a period of variation when there was no accepted practice, and essentially […]

Nano Technology No ratings yet.

Nano Technology Abstract It is a technology that which exploits phenomena, and structures which could best occur at the nanometer scale, that’s the size of various atoms and small molecules. Nanotechnology is the facts and manipulates of depending on variety at dimensions of approximately 1 to one hundred nanometers, in which specific phenomena enable novel […]

Running gearing No ratings yet.

Running Gearing Synopsis Running gearing is a new type of device designed to change continuous motion into rotary motion. The term “running gearing” is only a temporary name given to the mechanism and the tool has not yet signified given its specific name. The jogging gearing developed by way of Mr V.A.Vorgushin, an engineer, an […]

Radar Bullets for Mine Detection No ratings yet.

Radar Bullets for Mine Detection ABSTRACT Now a day in locations like Afghanistan and Iraq we realize that landmines are inflicting extreme threat to the lives of civilians. The mines which are implanted for the duration of the wartime may stay undetected for numerous a long time and can be activated after that. Also during […]

Paper Battery No ratings yet.

Paper Battery Abstract We said that Paper battery is ultra-thin power storage, flexible, and manufacturing device shaped by combining carbon nanotube s with a conventional sheet of cellulose-primarily based paper. A paper battery acts as both an excessive-energy battery, connecting additives and supercapacitor, which are separate in conventional electronics. This combination allows the process of […]

If you need more details about above projects or could not find your related projects, kindly email us at:- admin@allprojectreports.in

All Project Reports © 2017 | XML Feeds | Sitemap | Privacy | Disclaimer | Contact Us